Product introduction
KSKP series is semi H type single knuckle press.
D type semi H strong frame for the dynamic perfect precision.
- Dimensions
Equipments - Outline
specifications
Knuckle Press Feature
- Concetration Lubrication type recirculating auto lubrication system
- The hydraulic overload protector safeguard dies
- The long life of die according to reduce impact on working
- The development of working precision
- The solution of noise, pollution according to reduce the working noise
- The long life of press according to reduce the working vibration
Outline
-
Hydraulic Clutch & Brake
- Longer lining life, no-slip fly wheel,
 embedded air pressure,consistent slip and
  high durability
- Low air consumption and easy brake
- Reduced noise as it run in the oil tank
- Enhanced working condition with reduced
  noise and dust -
Plunger guide
High precise plunger guides.
Plunger guide absorbs the thrust force. -
Angle curve
Slow touch speed in the work long ensures high productivity and precision cold press work minimizing spring back.
-
1. Portable Box
The movable portable box protects the
dieduring die changing.
2. Operation Panel
This pendant-type operationl panel ensures
easy and accurate handling.
3. Encoder Detector
The over run detector identifies any abnormal
rotation of the crank.
MAJOR DIMENSIONS
KSKP 60D |
KSKP 80D |
KSKP 110D |
KSKP 160D |
KSKP 200D |
KSKP 300D |
KSKP 400D |
|
---|---|---|---|---|---|---|---|
A | 1100 | 1250 | 1350 | 1515 | 1580 | 1900 | 2000 |
B | 1450 | 1650 | 1800 | 1875 | 1945 | 2380 | 2545 |
C | 1200 | 1350 | 1450 | 1620 | 1750 | 2090 | 2150 |
D | 1600 | 1850 | 2050 | 2150 | 2255 | 2697 | 2902 |
E | 800 | 800 | 900 | 930 | 950 | 1050 | 1200 |
F | 2700 | 3200 | 3600 | 4160 | 4025 | 4910 | 5215 |
G | 1450 | 1550 | 1650 | 2000 | 2021 | 2195 | 2280 |
SPECIFICATION ㆍAll specifications are subject to change without notice.
MODEL ITEM |
UNIT | KSKP-60D | KSKP-80D | KSKP-110D | KSKP-160D | KSKP-200D | KSKP-300D | KSKP-400D | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
S.T | H.S | S.T | H.S | S.T | H.S | S.T | H.S | S.T | H.S | S.T | H.S | S.T | H.S | ||
Capacity | ton | 60 | 80 | 110 | 160 | 200 | 300 | 400 | |||||||
Rated Tonnage Point Above (B.D.C) |
mm | 3.2 | 1.6 | 5 | 3 | 6 | 3 | 6 | 3 | 6 | 4 | 7 | 4 | 7 | 4 |
Stroke Length | mm | 80 | 50 | 130 | 60 | 150 | 60 | 180 | 60 | 200 | 80 | 250 | 100 | 250 | 100 |
No. of Stroke | SPM | 90 | 180 | 65 | 130 | 55 | 120 | 50 | 100 | 45 | 85 | 30 | 50 | 30 | 50 |
Die height | mm | 320 | 350 | 400 | 450 | 500 | 550 | 550 | |||||||
Slide Adjustment | mm | 50 | 50 | 70 | 100 | 100 | 100 | 100 | |||||||
Slide Area (LR x FB) | mm | 600 x 350 | 700 x 500 | 900 x 500 | 1050 x 650 | 1150 x 750 | 1350 x 900 | 1400 x 950 | |||||||
Bolster Area (LR x FB) | mm | 800 x 500 | 900 x 550 | 1000 x 650 | 1150 x 700 | 1200 x 750 | 1450 x 950 | 1500 x 1000 | |||||||
Bolster thickness | mm | 110 | 120 | 140 | 150 | 170 | 200 | 230 | |||||||
Side Opening | mm | 350 x 350 | 400 x 400 | 450 x 500 | 500 x 600 | 550 x 700 | 600 x 950 | 600 x 900 | |||||||
Working Height | mm | 800 | 800 | 900 | 930 | 950 | 1050 | 1200 | |||||||
Main Motor | Kw x P | VS)7.5 x 4 | VS)11 x 4 | VS)15 x 4 | VS)19 x 4 | VS)22 x 4 | VS)37 x 4 | VS)45 x 4 | |||||||
AC)7.5 x 4 | AC)7.5 x 4 | AC)11 x 4 | AC)15 x 4 | AC)19 x 4 | AC)30 x 4 | AC)37 x 4 | |||||||||
Slide Adjust Motor | Kw x P | 0.4 x 4 | 0.4 x 4 | 0.75 x 4 | 0.75 x 4 | 1.5 x 4 | 2.2 x 4 | 3.7 x 4 | |||||||
Air Pressure | Kg/cm² | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
STANDARD EQUIPMENTS
DESCRIPTIONS | REMARKS | DESCRIPTIONS | REMARKS |
---|---|---|---|
Slide adjustment device | Attaching upper and lower limit stop L/S at 0.1 mm interval | Air ejector | |
Preset counter | 6 DIGIT | Automatic oiling device | Oil Type |
Overload safety device | Hydraulic (Hydraulic System) | 220V outlet | Dedicated to working light |
Overrun detection device | Beam-type safety device | ||
Portable box | Prevention of damage during mold exchange |
Variable motor | |
Encoder cam system | 5 Spares | ||
Crank angle system | Electronic (Digital Type) |
OPTION EQUIPMENTS
DESCRIPTIONS | REMARKS |
---|---|
Misfeed detecting device | |
Mold rapid exchange device | |
Antivibration device | Air type, Spring-type, Rubber type |
Automated system | Uncoiler, Leveller, Feeder |
Press robot | |
Knockout bar device |