Product introduction
This Straight side Crankless Press is so suitable to manufactue the lates such as midium and large type
blanking, piercing, drawing and stamping, ets. what are need for long stroke and wide works area.
Frame is so strong which was made with strong plate and welding type and its life is so long for use.
- Dimensions
Equipments - Outline
specifications
CLP Features
- Applying the eccentric gear highly resistant to torsional strength, it is suitable for deep throttle work in large parts and 1-stroke 1-stop work.- Frame with adequate strength and stiffness
- Applying Plunge Guide, eliminating the thrust load generated from driving unit
- Clutch and brake ensuring excellent reliability even in single speed work
- Centralized concentrated circulatory lubrication system ensuring optimal lubrication
- Operation Panel easy to operate
- Applying hydraulic Tie-Rod
MOVING BOLSTER METHOD
2POINT CRANKLESS PRESS SPECIFICATION
| MODEL ITEM |
UNIT | CL2P-300 | CL2P-400 | CL2P-500 | CL2P-600 | CL2P-800 | CL2P-1000 | CL2P-1200 |
|---|---|---|---|---|---|---|---|---|
| Capacity | ton | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 |
| Rated Tonnage Point Above (B.D.C) |
mm | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
| No. of Stroke | SPM | 10~20 | 10~20 | 10~20 | 10~20 | 10~20 | 10~20 | 10~20 |
| Stroke Length | mm | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Die height | mm | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 |
| Slide Adjustment | mm | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Slide Area (LR x FB) | mm | 2500 x 1600 | 2800 x 1600 | 2800 x 1600 | 2800 x 1600 | 2800 x 1600 | 3000 x 1600 | 3000 x 1600 |
| Bolster Area (LR x FB) | mm | 2500 x 1600 | 2800 x 1600 | 2800 x 1600 | 2800 x 1600 | 2800 x 1600 | 3000 x 1600 | 3000 x 1600 |
| Main Motor | Kw x p | 55 x 4 | 75 x 4 | 90 x 4 | 90 x 4 | 110 x 4 | 110 x 4 | 135 x 4 |
2POINT CRANKLESS PRESS DIE CUSHION(OPTION)
| MODEL ITEM |
UNIT | CL2P-300 | CL2P-400 | CL2P-500 | CL2P-600 | CL2P-800 | CL2P-1000 | CL2P-1200 |
|---|---|---|---|---|---|---|---|---|
| Capacity | ton | 80 | 80 | 100 | 100 | 120 | 150 | 150 |
| Stroke Length | mm | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| Stroke Adjustment | mm | 0~300 | 0~300 | 0~300 | 0~300 | 0~300 | 0~300 | 0~300 |
| Pad Area (LR x FB) | mm | 2050 x 1000 | 2300 x 1250 | 2300 x 1250 | 2300x 1250 | 2300x 1250 | 2300x 1250 | 2300x 1250 |
4POINT CRANKLESS PRESS SPECIFICATION
| MODEL ITEM |
UNIT | CL4P-800 | CL4P-1000 | CL4P-1200 | CL4P-1500 | CL4P-2000 | CL4P-2300 | CL4P-2500 |
|---|---|---|---|---|---|---|---|---|
| Capacity | ton | 800 | 1000 | 1200 | 1500 | 2000 | 2300 | 2500 |
| Rated Tonnage Point Above (B.D.C) |
mm | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
| No. of Stroke | SPM | 10~20 | 10~20 | 10~20 | 10~20 | 9~18 | 9~18 | 9~18 |
| Stroke Length | mm | 800 | 800 | 800 | 800 | 800 | 800 | 800 |
| Die height | mm | 1300 | 1300 | 1300 | 1300 | 1400 | 1400 | 1400 |
| Slide Adjustment | mm | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Slide Area (LR x FB) | mm | 3200 x 2000 | 3400 x 2300 | 3400 x 2300 | 4500 x 2500 | 4500 x 2500 | 4500 x 2500 | 4500 x 2500 |
| Bolster Area (LR x FB) | mm | 3200 x 2000 | 3400 x 2300 | 3400 x 2300 | 4500 x 2500 | 4500 x 2500 | 4500 x 2500 | 4500 x 2500 |
| Main Motor | Kw x p | 135 x 4 | 150 x 4 | 185 x 4 | 220 x 4 | 250 x 4 | 300 x 4 | 350 x 4 |
4POINT CRANKLESS PRESS DIE CUSHION(OPTION)
| MODEL ITEM |
UNIT | CL4P-800 | CL4P-1000 | CL4P-1200 | CL4P-1500 | CL4P-2000 | CL4P-2300 | CL4P-2500 |
|---|---|---|---|---|---|---|---|---|
| Capacity | ton | 120 | 150 | 180 | 180 | 250 | 300 | 300 |
| Stroke Length | mm | 300 | 300 | 300 | 350 | 350 | 350 | 350 |
| Stroke Adjustment | mm | 0~300 | 0~300 | 0~300 | 0~350 | 0~350 | 0~350 | 0~350 |
| Pad Area (LR x FB) | mm | 2600 x 1700 | 2900 x 1700 | 2900 x 1700 | 3800 x 1900 | 3800 x 1900 | 3800 x 1900 | 3800 x 1900 |
STANDARD EQUIPMENTS
| DESCRIPTIONS | |||
|---|---|---|---|
| Electric slide adjustment device | Safety block | Phototube safety device | Pneumatic die cushion and rapid exhaust system |
| Lighting type crank angle indicator |
Front control panel attachable to main body |
Main motor forward /reverse device |
Local light, warning light, lighting |
| Hydraulic overload safety device | Portable pumping operation stand | Operation monitor (Pilot Lamp type) |
Safety guide device |
| Circulation oiling device | Electronic rotary cam switch | Counter (Total & Preset function) |
|
| Airline total lubricator | Restart prevention circuit | Emergency stop switch | |
| Air coupler | Motion detector (proximity switch detection) |
Electrical control system (PLC type) |
|
OPTION EQUIPMENTS
| DESCRIPTIONS | |
|---|---|
| D.C main motor | Anti-vibration device |
| Slide, die cushion adjustment automatic regulator | Micro-inching device |
| Die cushion, balance cylinder pressure automatic regulator | Auto Die-Change unit |
| Air supply device for mold automation | Operation management system |
| Moving bolster | Die pre-loading device |
| Tonnage indicator | Hydraulic wet clutch & brake |
